TPI HXG-2 Maximize

TPI HXG-2

Combust Gas Leak Detector (HXG-2) Tpi

More details

TPI HXG-2

Availability: Available Now

$271.09

Add Add

HXG-2 Tpi Combust Gas Leak Detector

As lightweight and portable as it is sensitive, the HXG2 helps you pinpoint the smallest leaks quickly and accurately. Its calibrated alarm will indicate dangerous concentrations of combustible gases.

 

  • UL 913 intrinsically safe
  • Calibrated to NIS traceable standards
  • Instant response
  • 10 ppm sensitivity
  • Adjustable tic rate
  • Settable alarm
  • Visual and audible leak indication
  • 16'' gooseneck
  • Hard carrying case

 

Combustible Gasses Detected (Partial List) Methane, Natural Gas, Gasoline, Diesel, Propane (LPG), Butane, Kerosene,
Sensitivity 10ppm (methane)
Sensor Type Low power semiconductor
Probe Length 16”
Leak Indication Audio / Visual
Adjustable Tic Rate Yes
Alarm Yes
Carbon Monoxide Measurement No
%LEL Indication No
Internal Sample Pump No
Intrinsic Safety Rated Yes
Battery Type “C” (3)
Weight 1.3lb

 

1. What is the difference between the HXG-2 and the 720b?

The HXG-2 is intrinsically safe and has an adjustable alarm.

2. Can I use the 720b or HXG-2 to test for carbon monoxide as well as combustible gas leaks?

The HXG-2 and 720b are designed to detect combustible gas leaks. The 735 or 775 are the best choices to test for carbon monoxide as well as combustible gas leaks.

3. What is the difference between the 735 and 775?

Both the 775 and 735 can be used to test for carbon monoxide in ambient air as well as test for combustible gas leaks. The 735 is pump driven and can be used to test for CO infurnaces as well. When testing for combustible leaks the 775 uses an audible "tic" and visual indication while the 735 has audible indicationand displays the leak level in %LEL.

4. I only need to test for combustible gas leaks, which detector should I choose?

The 725 is pocket sized with LED and audible indicators that activate at preset leak levels. The 725 can detect a leak but does nothave the capability to determine the source. The 720b and HXG-2 are more sensitive, utilize a thumb wheel adjustable "tic" rate, and have goosenecks that enable them to reach into tight areas and not only detect a leak but determine the source. The HXG-2 has an adjustable alarm and is intrinsically safe.

5. I need to be able to produce a "hardcopy" of test results. Do any of the TPI detectors have this capability?

Yes, the 735 has an infrared interface for printing testing results.

6 What gases can be detected?

Gases that can be detected include but are not limited to Acetone, Alcohol, Butane, Gasoline,Kerosene, Methane, Natural Gas, and Propane.

 

Write your review

TPI HXG-2

TPI HXG-2

Combust Gas Leak Detector (HXG-2) Tpi

Write your review

12 other products in the same category: