512437623 1 HP ECM Motor Rgrm-07eybgs UGRM-07/wybgs
- 1 HP ECM motor with module. Please note, we do NOT supply the motor without the module. You may either order the complete motor and module assembly, or the module alone. In most cases, the module alone will be bad.
- Motors are programmed from blank motors on an as-needed basis. If no inventory is shown for this motor, please place an order and a motor will be programmed and shipped.
- Part numbers 510009 and VZ-7 are diagnostic tools which may be used to test these motors.
- Part number VZPRO is a plug-in surge protector device for use with these motors to help protect from electrical transients and lightning.
- See Technical Data for replacement module information. Modules are NOT interchangeable. You must use the specified module for this motor.
- See ECM Service Guide for instructions on troubleshooting and control module replacement. A copy of the guide can be obtained from the "Documents" menu above.
Motor Type: ECM
No. of Speeds: Variable
Shaft Diameter (in.): 1/2
Motor Body Diameter (in.): 5-5/8
Keyed/Flat Shaft Length (in.): 3
Overall Shaft Length (in.): 3-1/2
Motor Body Length (in.): 8-1/2
Overall Motor Length (in.): 12
Frame Size: 48
Bearing Type: Ball
Drive Type: Direct Drive
Replacement Module: 51-24383-102
30 other products in the same category: