Fan Blade 24" 3 blade 26 degree CCW 70-102345-01 Rheem / Ruud
- Number Of Blades: 3
- Overall Diameter (Inches): 24
- Rotation (Air Discharge Side): CCW
- Pitch (Degrees): 26
- Bore Diameter (Inches): 1/2
- Hub Location: Inlet Side
13QJA42, 13QJA48, 13QJA60, 13SJ48, 13SJ60, RJNL-A072, RJNL-C072, RQNMA042, RQNMA048, RQNMA060, RQPMA042, RQPMA043, RQPMA048, RQPMA049, RQPMA060, SJNL-A072, RQRMA042, RQRMA048, RQRMA060, SSNJA048, SSNMA048, SSNMA060, SSNMA072
Note: The fan blade listed below is of a new design to further enhance sound characteristics and may be substituted for the above fan where applicable.
RQNJA042, RSNJA048, RSNJA060, RSNMA048, RSNMA060, RSPMA048, RSPMA060
Note: The fan and motor part numbers below may be different than originally supplied on the equipment. This fan and motor combination was changed to enhance the sound characteristics of the unit. Fan blade should be positioned on the shaft such that the highest point on the blade is two inches below the uppermost point on the motor housing while allowing a minimum of 1/8 inch clearance between the motor and fan. CAUTION: When replacing either the fan or the motor, both components must be matched in the combination shown below. In order to ensure correct performance, do not change one component only without verifying that the combination is correct.
(RQNJA042, 51-100998-25), (RQNJA048, 51-100998-25), (RQNJAB060, 51-100998-25), (RSNJA048, 51-100998-25), (RSNJA060, 51-100998-25)
All Controls Should Be Installed By A Licensed Professional.
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE!